CS Unitec
Eibenstock EBS 180 H 7" Heavy-Duty Concrete Surface Grinders with dust extraction - 20 AMP
The EBS 180 H Concrete Surface Grinder is held by two side handles. This ergonomic "H" design differs from traditional right angle grinders and allows the operator to finish larger surfaces with less fatigue. Additionally, the motor is set above the grinding wheel in a dust-free zone, resulting in longer tool life.
A brush shield protects against dust and enables adjustment of the working height to the wear of the diamond grinding wheel. Also, the EBS 180 H has a removable front dust guard for finishing concrete floors into the corners and edges. An optional walk-behind cart (P/N 37217) allows for comfortable operation of the EBS 180 H Concrete Grinder over larger surfaces. The perfect addition to virtually dust-free grinding when used with a CS Unitec vacuum. Model EBS 180 H includes one Diamond grinding wheel.
Advantages:
- Improved ergonomics and easier handling
- Long power tool life due to the new motor arrangement
- Motor out of the dust flow zone
- Switch outside of the cooling air stream
- Grinds into corners and edges because of removable front dust guard
- Efficient dust exhaust outlet
- High grinding power for faster surface preparation
Use:
- Grinding and smoothing of surfaces
- Removing of screed seams, residual mud, epoxy and thermoplastic coatings
- Preparing of surfaces, e.g. for tile renovation
- Concrete, screed, tile adhesive, natural stone, plaster, paint, coatings, carpet adhesive – with corresponding grinding wheels (accessories)
Features:
- Powerful 20 amp motor
- Electronic – soft start, temperature and overcurrent cut-off
- Foldable front edge of dust guard – for grinding directly to the edge of the work area (no laborious reworking, saves time and costs)
- Brush rim – high suction power for dust-free working by connecting an industrial vacuum cleaner (accessory) to the 1-1/4" nozzle
- Parallel handle position – ergonomic handles allow exact and balanced guiding for a better surface finish
- Floor guiding device – available as accessory
Additional information
Weight
Dimensions
Description
MODEL EBS 180 H
Power input
20 Amp, 110 V
Load speed
6,000 RPM
Disc diameter
7"
Spindle connection
7/8" dia.
Weight
18 lbs.
Supplied
in a case with diamond grinding wheel (concrete) and tool kit
Optional Cart
Model no. 37217
Eibenstock EBS 180 H 7" Heavy-Duty Concrete Surface Grinders with dust extraction - 20 AMP
The EBS 180 H Concrete Surface Grinder is held by two side handles. This ergonomic "H" design differs from traditional right angle grinders and allows the operator to finish larger surfaces with less fatigue. Additionally, the motor is set above the grinding wheel in a dust-free zone, resulting in longer tool life.
A brush shield protects against dust and enables adjustment of the working height to the wear of the diamond grinding wheel. Also, the EBS 180 H has a removable front dust guard for finishing concrete floors into the corners and edges. An optional walk-behind cart (P/N 37217) allows for comfortable operation of the EBS 180 H Concrete Grinder over larger surfaces. The perfect addition to virtually dust-free grinding when used with a CS Unitec vacuum. Model EBS 180 H includes one Diamond grinding wheel.
Advantages:
- Improved ergonomics and easier handling
- Long power tool life due to the new motor arrangement
- Motor out of the dust flow zone
- Switch outside of the cooling air stream
- Grinds into corners and edges because of removable front dust guard
- Efficient dust exhaust outlet
- High grinding power for faster surface preparation
Use:
- Grinding and smoothing of surfaces
- Removing of screed seams, residual mud, epoxy and thermoplastic coatings
- Preparing of surfaces, e.g. for tile renovation
- Concrete, screed, tile adhesive, natural stone, plaster, paint, coatings, carpet adhesive – with corresponding grinding wheels (accessories)
Features:
- Powerful 20 amp motor
- Electronic – soft start, temperature and overcurrent cut-off
- Foldable front edge of dust guard – for grinding directly to the edge of the work area (no laborious reworking, saves time and costs)
- Brush rim – high suction power for dust-free working by connecting an industrial vacuum cleaner (accessory) to the 1-1/4" nozzle
- Parallel handle position – ergonomic handles allow exact and balanced guiding for a better surface finish
- Floor guiding device – available as accessory
Additional information
| Weight | |
|---|---|
| Dimensions |
Description
| Power input | 20 Amp, 110 V |
|---|---|
| Load speed | 6,000 RPM |
| Disc diameter | 7" |
| Spindle connection | 7/8" dia. |
| Weight | 18 lbs. |
| Supplied | in a case with diamond grinding wheel (concrete) and tool kit |
| Optional Cart | Model no. 37217 |
Website Powered by BannerOS. Your Business Energized!
Reviews