CS Unitec
Eibenstock EBS 1802.1 5" Surface Grinder w/Dust extraction
The EBS 1802.1 Concrete Surface Grinder is held by two side handles. This ergonomic "H" design differs from traditional right angle grinders and allows the operator to finish larger surfaces with less fatigue. Additionally, the motor is set above the grinding wheel in a dust-free zone, resulting in longer tool life.
A brush shield protects against dust and enables adjustment of the working height to the wear of the diamond grinding wheel. Also, the EBS 1802.1 has a removable front dust guard for finishing concrete floors into the corners and edges. An optional walk-behind cart (P/N 37210) allows for comfortable operation of the EBS 1802.1 Concrete Grinder. The perfect addition to virtually dust-free grinding when used with a CS Unitec vacuum. Includes one 5" Diamond Grinding Wheel
Standard Equipment that comes with the Concrete Surface Grinders includes: Spanner wrench, open-ended wrench and metal carrying case.
Use:
- Grinding and smoothing of surfaces
- Removing of sceed seams, residual mud, epoxy and thermoplastic coatings
- Preparing of surfaces, e.g. for tile renovation
- Concrete, screed, tile adhesive, plaster, paint, coatings and carpet adhesive
Advantages:
-
Improved ergonomics and easier handling
-
Long power tool life due to the new motor arrangement
-
Motor out of the dust flow zone
-
Switch outside of the cooling air stream
-
Grinds into corners and edges because of removable front dust guard
-
Efficient dust exhaust outlet
-
High grinding power for faster surface preparation
-
Overload protection for prolonged motor life
Features
Side handles and extra power
- Vibration reduction technology
- Remove paint, epoxy, glue and other hard coatings
- Smooth rough surfaces
- Clean concrete before applying new paint or coatings
- Collect dust for clean working area with a CS Unitec dust extraction vacuum
Additional information
Weight
Dimensions
Description
MODEL EBS 1802.1
Power input
16 Amp, 110 V
Load speed
10,000 RPM
Disc diameter
5"
Spindle connection
7/8" dia.
Weight
12 lbs.
Supplied
in a case with diamond grinding wheel (concrete) and tool kit
Optional Cart
Model no. 37210
Eibenstock EBS 1802.1 5" Surface Grinder w/Dust extraction
The EBS 1802.1 Concrete Surface Grinder is held by two side handles. This ergonomic "H" design differs from traditional right angle grinders and allows the operator to finish larger surfaces with less fatigue. Additionally, the motor is set above the grinding wheel in a dust-free zone, resulting in longer tool life.
A brush shield protects against dust and enables adjustment of the working height to the wear of the diamond grinding wheel. Also, the EBS 1802.1 has a removable front dust guard for finishing concrete floors into the corners and edges. An optional walk-behind cart (P/N 37210) allows for comfortable operation of the EBS 1802.1 Concrete Grinder. The perfect addition to virtually dust-free grinding when used with a CS Unitec vacuum. Includes one 5" Diamond Grinding Wheel
Standard Equipment that comes with the Concrete Surface Grinders includes: Spanner wrench, open-ended wrench and metal carrying case.
Use:
- Grinding and smoothing of surfaces
- Removing of sceed seams, residual mud, epoxy and thermoplastic coatings
- Preparing of surfaces, e.g. for tile renovation
- Concrete, screed, tile adhesive, plaster, paint, coatings and carpet adhesive
Advantages:
-
Improved ergonomics and easier handling
-
Long power tool life due to the new motor arrangement
-
Motor out of the dust flow zone
-
Switch outside of the cooling air stream
-
-
Grinds into corners and edges because of removable front dust guard
-
Efficient dust exhaust outlet
-
High grinding power for faster surface preparation
-
-
Overload protection for prolonged motor life
Features
Side handles and extra power
- Vibration reduction technology
- Remove paint, epoxy, glue and other hard coatings
- Smooth rough surfaces
- Clean concrete before applying new paint or coatings
- Collect dust for clean working area with a CS Unitec dust extraction vacuum
Additional information
| Weight | |
|---|---|
| Dimensions |
Description
| Power input | 16 Amp, 110 V |
|---|---|
| Load speed | 10,000 RPM |
| Disc diameter | 5" |
| Spindle connection | 7/8" dia. |
| Weight | 12 lbs. |
| Supplied | in a case with diamond grinding wheel (concrete) and tool kit |
| Optional Cart | Model no. 37210 |
Website Powered by BannerOS. Your Business Energized!
Reviews